{
  "title": "AUV viscous-flow screening and drag-benefit assessment",
  "date": "2026-10-06",
  "status": "Screening completed; vehicle-performance validation NOT established",
  "conditions": {
    "speed_m_s": 0.3,
    "density_kg_m3": 998,
    "dynamic_viscosity_Pa_s": 0.000998,
    "Re_hull": 210000,
    "reference_area_m2": 0.02040375,
    "reference_length_m": 0.7,
    "inlet_turbulence_intensity": 0.01,
    "eddy_to_laminar_viscosity_ratio": 1,
    "incidence_degrees": 0,
    "thrusters": "unpowered dimensional proxies, no blades",
    "tether": "excluded"
  },
  "comparison": "Same complete vehicle, same sealed torch and same two support blocks. Only the wrap_saddle and lower_cover are removed in the exposed-light reference. Not a claim about all fairings or the entire vehicle versus a bare tube.",
  "comparisons": [
    {
      "comparison": "Coarse \u00b7 10.67 mm",
      "covered": {
        "case": "faired-run-10mm",
        "iterations": 450,
        "CD": 0.4724988977,
        "drag_N": 0.43296605483303163,
        "pressure_force_coeff_independent": [
          0.4647516442784324,
          0.0520012810951496,
          0.01404239552494994
        ],
        "friction_force_coeff_independent": [
          0.007390717875807001,
          1.9277216543923253e-05,
          -2.8025378976120475e-05
        ],
        "independent_CD_relative_difference": -0.0007545743439743013,
        "last_100_CD_range_relative": 0.0008265885002149746,
        "last_100_CD_drift_relative": -0.0008265885002149746,
        "final_residuals": {
          "rms[P]": -8.948215223,
          "rms[U]": -9.353982055,
          "rms[V]": -9.461985855,
          "rms[W]": -9.565435474,
          "rms[k]": -0.1326456095,
          "rms[w]": 1.471445862
        },
        "surface_area_m2": 0.4752320183865856,
        "area_weighted_yplus_percentiles_5_50_95": [
          0.0,
          45.919985943599364,
          118.78882998634792
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.05934288718030441,
          "yplus_1_to5": 0.022541245631971574,
          "yplus_5_to30": 0.27441936198518213,
          "yplus_30_to300": 0.6436965052025421,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/faired-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.010667,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -2,
              -1,
              -1
            ],
            [
              2.5,
              1,
              1
            ]
          ],
          "surface_patches": 86,
          "nodes": 40714,
          "volume_elements": {
            "4": 229420
          },
          "minSICN_percentiles": [
            0.016082181341135034,
            0.36265889864096645,
            0.5059113258403032,
            0.8385064720646429,
            0.982201093787191,
            0.9999945804243774
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 107.4294228553772,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "exposed": {
        "case": "bare-run-10mm",
        "iterations": 450,
        "CD": 0.4619121446,
        "drag_N": 0.42326506982436685,
        "pressure_force_coeff_independent": [
          0.4540445118858506,
          0.057168897083046524,
          0.020636427247530263
        ],
        "friction_force_coeff_independent": [
          0.0074763421136382424,
          4.4090583703641e-05,
          -1.6059350474042938e-05
        ],
        "independent_CD_relative_difference": -0.0008471104409909502,
        "last_100_CD_range_relative": 0.0003974123453653001,
        "last_100_CD_drift_relative": 0.0003974123453653001,
        "final_residuals": {
          "rms[P]": -8.887029188,
          "rms[U]": -9.755847834,
          "rms[V]": -10.03540333,
          "rms[W]": -10.10002245,
          "rms[k]": -0.814173044,
          "rms[w]": -0.7160900782
        },
        "surface_area_m2": 0.4630420531590417,
        "area_weighted_yplus_percentiles_5_50_95": [
          4.380901887956864,
          46.61152357991438,
          120.43385086979876
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.0314089789841213,
          "yplus_1_to5": 0.026073632998919856,
          "yplus_5_to30": 0.2855064693004178,
          "yplus_30_to300": 0.6570109187165412,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/bare-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.010667,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -2,
              -1,
              -1
            ],
            [
              2.5,
              1,
              1
            ]
          ],
          "surface_patches": 72,
          "nodes": 40278,
          "volume_elements": {
            "4": 227775
          },
          "minSICN_percentiles": [
            0.05045592953361831,
            0.36164955802014787,
            0.5056681158912709,
            0.8381992870467793,
            0.9817036546533817,
            0.9999513966500765
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 93.28649592399597,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "difference_N": 0.009700985008664786,
      "difference_percent": 2.2919408428128016
    },
    {
      "comparison": "Medium \u00b7 8 mm",
      "covered": {
        "case": "faired-run-8mm",
        "iterations": 336,
        "CD": 0.4425620979,
        "drag_N": 0.40553399484976815,
        "pressure_force_coeff_independent": [
          0.4356096411563092,
          0.05263431002312796,
          0.003933087060539148
        ],
        "friction_force_coeff_independent": [
          0.006655888153642607,
          5.2570310293025825e-05,
          1.1855315764960558e-05
        ],
        "independent_CD_relative_difference": -0.0006701174625108886,
        "last_100_CD_range_relative": 0.002501740370603613,
        "last_100_CD_drift_relative": -0.002501740370603613,
        "final_residuals": {
          "rms[P]": -10.67030519,
          "rms[U]": -11.24207483,
          "rms[V]": -11.15467065,
          "rms[W]": -11.14528868,
          "rms[k]": -10.48609614,
          "rms[w]": -6.912159999
        },
        "surface_area_m2": 0.4803637167831628,
        "area_weighted_yplus_percentiles_5_50_95": [
          2.6229965686798096,
          31.34692273284918,
          86.17275341504951
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.04410268179982666,
          "yplus_1_to5": 0.022918992522591018,
          "yplus_5_to30": 0.41180795289154104,
          "yplus_30_to300": 0.5211703727860413,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/faired-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.008,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -2,
              -1,
              -1
            ],
            [
              2.5,
              1,
              1
            ]
          ],
          "surface_patches": 86,
          "nodes": 83304,
          "volume_elements": {
            "4": 482012
          },
          "minSICN_percentiles": [
            0.03125912656101376,
            0.3668732764337558,
            0.512342936765732,
            0.8438492421717085,
            0.9815384971218374,
            0.9999928817313339
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 79.03616499900818,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "exposed": {
        "case": "bare-run-8mm",
        "iterations": 375,
        "CD": 0.4062568543,
        "drag_N": 0.37226632339537996,
        "pressure_force_coeff_independent": [
          0.3992375272963321,
          0.03876239742561752,
          0.004465245303935369
        ],
        "friction_force_coeff_independent": [
          0.006704230732880436,
          6.983860122657386e-05,
          4.294919827669541e-06
        ],
        "independent_CD_relative_difference": -0.0007756085034685833,
        "last_100_CD_range_relative": 0.0004468192512417048,
        "last_100_CD_drift_relative": 2.2579793215816003e-05,
        "final_residuals": {
          "rms[P]": -9.840426662,
          "rms[U]": -9.703610907,
          "rms[V]": -9.643491532,
          "rms[W]": -9.635022865,
          "rms[k]": -10.46852717,
          "rms[w]": -6.918648293
        },
        "surface_area_m2": 0.4680252881154845,
        "area_weighted_yplus_percentiles_5_50_95": [
          4.862243273349862,
          31.53112917195703,
          88.59263287526979
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.026687106026955242,
          "yplus_1_to5": 0.026129283702926005,
          "yplus_5_to30": 0.4222450215421618,
          "yplus_30_to300": 0.524938588727957,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/bare-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.008,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -2,
              -1,
              -1
            ],
            [
              2.5,
              1,
              1
            ]
          ],
          "surface_patches": 72,
          "nodes": 82770,
          "volume_elements": {
            "4": 480037
          },
          "minSICN_percentiles": [
            0.027821156402396796,
            0.3660333516754576,
            0.514548064376979,
            0.8438069553483633,
            0.9814500036271301,
            0.9999558594804598
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 56.41371297836304,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "difference_N": 0.03326767145438819,
      "difference_percent": 8.936524569549894
    },
    {
      "comparison": "Fine \u00b7 6 mm",
      "covered": {
        "case": "faired-run-6mm",
        "iterations": 315,
        "CD": 0.4417978187,
        "drag_N": 0.40483366104660856,
        "pressure_force_coeff_independent": [
          0.43528350981119157,
          0.047694072767033795,
          0.004962351629564017
        ],
        "friction_force_coeff_independent": [
          0.00624951592208974,
          5.917673716333016e-05,
          1.1087285553528506e-05
        ],
        "independent_CD_relative_difference": -0.0005993532686464631,
        "last_100_CD_range_relative": 0.0011424722542800708,
        "last_100_CD_drift_relative": -0.0009681395127071547,
        "final_residuals": {
          "rms[P]": -9.992808107,
          "rms[U]": -9.731547345,
          "rms[V]": -9.829503689,
          "rms[W]": -9.676914513,
          "rms[k]": -11.04320634,
          "rms[w]": -7.17886997
        },
        "surface_area_m2": 0.4856040870705442,
        "area_weighted_yplus_percentiles_5_50_95": [
          4.470426787776669,
          22.842331192437292,
          62.336333907894506
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.029973860158694788,
          "yplus_1_to5": 0.03238070240287419,
          "yplus_5_to30": 0.6313440921092889,
          "yplus_30_to300": 0.3063013453291421,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/faired-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.006,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -2,
              -1,
              -1
            ],
            [
              2.5,
              1,
              1
            ]
          ],
          "surface_patches": 86,
          "nodes": 177805,
          "volume_elements": {
            "4": 1048647
          },
          "minSICN_percentiles": [
            0.012032033274057687,
            0.3701763025171499,
            0.5211812708624232,
            0.8489010941837677,
            0.9814693515362358,
            0.9999897833251982
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 148.17519688606262,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "exposed": {
        "case": "bare-run-6mm",
        "iterations": 316,
        "CD": 0.4060459971,
        "drag_N": 0.37207310810861094,
        "pressure_force_coeff_independent": [
          0.39937108981754804,
          0.0384403885500988,
          0.004250417996427238
        ],
        "friction_force_coeff_independent": [
          0.006404984271234413,
          3.8408773624131935e-05,
          7.1806423413272635e-06
        ],
        "independent_CD_relative_difference": -0.0006647596901467878,
        "last_100_CD_range_relative": 4.8860399822095174e-05,
        "last_100_CD_drift_relative": -3.643424035612964e-06,
        "final_residuals": {
          "rms[P]": -9.964016403,
          "rms[U]": -9.778159727,
          "rms[V]": -9.738910393,
          "rms[W]": -9.719968571,
          "rms[k]": -11.01420711,
          "rms[w]": -7.139657321
        },
        "surface_area_m2": 0.4710584091958404,
        "area_weighted_yplus_percentiles_5_50_95": [
          5.122233761009232,
          23.247114479343573,
          65.04061304250915
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.019396689429538486,
          "yplus_1_to5": 0.026029717052374675,
          "yplus_5_to30": 0.6354630342518506,
          "yplus_30_to300": 0.3191105592662363,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/bare-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.006,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -2,
              -1,
              -1
            ],
            [
              2.5,
              1,
              1
            ]
          ],
          "surface_patches": 72,
          "nodes": 177238,
          "volume_elements": {
            "4": 1047677
          },
          "minSICN_percentiles": [
            0.016543845582901846,
            0.3694240045437592,
            0.520124138932208,
            0.8489008842858065,
            0.9814755726720287,
            0.9999982594477144
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 125.39011096954346,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "difference_N": 0.03276055293799762,
      "difference_percent": 8.804869855962439
    },
    {
      "comparison": "Larger domain \u00b7 8 mm",
      "covered": {
        "case": "faired-run-large",
        "iterations": 334,
        "CD": 0.447890584,
        "drag_N": 0.41041665937275384,
        "pressure_force_coeff_independent": [
          0.4408922353093993,
          0.05400725543283151,
          0.0024167069471537138
        ],
        "friction_force_coeff_independent": [
          0.006684617386119119,
          6.999672129955766e-05,
          -5.072326140826921e-07
        ],
        "independent_CD_relative_difference": -0.0007004641662249345,
        "last_100_CD_range_relative": 0.001673796013707319,
        "last_100_CD_drift_relative": -0.001673796013707319,
        "final_residuals": {
          "rms[P]": -10.36129751,
          "rms[U]": -10.65656494,
          "rms[V]": -10.59521839,
          "rms[W]": -10.68167344,
          "rms[k]": -10.19759809,
          "rms[w]": -6.725043903
        },
        "surface_area_m2": 0.480157621581668,
        "area_weighted_yplus_percentiles_5_50_95": [
          2.6944901943206787,
          31.7327887433414,
          85.72504658477912
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.04345515907357771,
          "yplus_1_to5": 0.024852433407337622,
          "yplus_5_to30": 0.40531500382951463,
          "yplus_30_to300": 0.5263774036895701,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/faired-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.008,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -3.0,
              -1.5,
              -1.5
            ],
            [
              3.75,
              1.5,
              1.5
            ]
          ],
          "surface_patches": 86,
          "nodes": 86158,
          "volume_elements": {
            "4": 495798
          },
          "minSICN_percentiles": [
            0.05046999865868964,
            0.3670826325667739,
            0.5155619140557907,
            0.8446271680485922,
            0.9815341799014543,
            0.999995879162358
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 191.96094799041748,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "exposed": {
        "case": "bare-run-large",
        "iterations": 313,
        "CD": 0.3993205009,
        "drag_N": 0.3659103179504054,
        "pressure_force_coeff_independent": [
          0.392268801285549,
          0.03839648663993106,
          -0.005041006572601124
        ],
        "friction_force_coeff_independent": [
          0.006735464194407483,
          5.613685408984554e-05,
          3.233935061660216e-06
        ],
        "independent_CD_relative_difference": -0.0007919338459478897,
        "last_100_CD_range_relative": 3.2051945044251345e-06,
        "last_100_CD_drift_relative": -1.3856036560424241e-06,
        "final_residuals": {
          "rms[P]": -11.04568069,
          "rms[U]": -10.49748983,
          "rms[V]": -10.78579094,
          "rms[W]": -10.79631956,
          "rms[k]": -10.95482918,
          "rms[w]": -6.754628928
        },
        "surface_area_m2": 0.4676378314961603,
        "area_weighted_yplus_percentiles_5_50_95": [
          5.0230557847570045,
          31.868530995239308,
          88.69086107289912
        ],
        "wall_area_fractions": {
          "yplus_lt1": 0.027343089901436787,
          "yplus_1_to5": 0.022311972735334633,
          "yplus_5_to30": 0.42155163379909755,
          "yplus_30_to300": 0.528793303564131,
          "yplus_gt300": 0.0
        },
        "finite_fields": true,
        "accepted_drag_claim": false,
        "reason": "Requires geometry, mesh, domain and near-wall/model sensitivity assessment, not just iterative convergence.",
        "mesh": {
          "surface_source": "work/viscous-cfd-20261006-v1/bare-light/body.ply",
          "surface_simplifications": "See geometry.json accompanying the source surface. CAD-derived proxy, small fittings suppressed; inactive thrusters without propeller blades",
          "h_m": 0.008,
          "boundary_layers": false,
          "domain_bounds_m": [
            [
              -3.0,
              -1.5,
              -1.5
            ],
            [
              3.75,
              1.5,
              1.5
            ]
          ],
          "surface_patches": 72,
          "nodes": 85745,
          "volume_elements": {
            "4": 494874
          },
          "minSICN_percentiles": [
            0.027821156402396796,
            0.36709050046047703,
            0.5167455629582485,
            0.8450907630371024,
            0.9819664857614071,
            0.999995879162358
          ],
          "nonpositive_quality": 0,
          "elapsed_s": 114.5632221698761,
          "status": "pilot mesh; wall resolution unassessed"
        }
      },
      "difference_N": 0.04450634142234844,
      "difference_percent": 12.163182954677085
    }
  ],
  "domain_change_percent": {
    "covered": 1.2040086860768628,
    "exposed": -1.7073812605455374
  },
  "benchmarks": {
    "flatplate-96-clustered": {
      "case": "flatplate-96-clustered",
      "iterations": 8000,
      "final_CD": 0.003353354003,
      "last_200_CD_relative_range": 0.00025079511207644914,
      "final_residuals": {
        "rms[P]": -6.615323179,
        "rms[U]": -7.115261088,
        "rms[V]": -7.351747123
      },
      "surface_fields": [
        "Pressure",
        "Velocity",
        "Pressure_Coefficient",
        "Density",
        "Laminar_Viscosity",
        "Heat_Capacity",
        "Thermal_Conductivity",
        "Temperature",
        "Skin_Friction_Coefficient",
        "Heat_Flux",
        "Y_Plus"
      ],
      "finite_surface_fields": true,
      "surface_points": 97,
      "wall_yplus_percentiles": [
        0.0,
        0.0,
        0.0,
        0.0,
        0.0,
        0.0
      ],
      "wall_point_fraction_yplus_30_to_300": 0.0,
      "expected_mean_Cf": 0.0034288812558423,
      "mean_Cf_relative_error": -0.022026791599625395,
      "local_Cf_rms_relative_error": 0.010733251459896564,
      "local_samples": [
        {
          "x_m": 0.05,
          "Cf": 0.005429241070143278,
          "Blasius": 0.005421537297360101
        },
        {
          "x_m": 0.1,
          "Cf": 0.0038522194779992617,
          "Blasius": 0.0038336057874191155
        },
        {
          "x_m": 0.25,
          "Cf": 0.0024507346100378358,
          "Blasius": 0.0024245851878895355
        },
        {
          "x_m": 0.45,
          "Cf": 0.0018395117578382167,
          "Blasius": 0.001807179099120034
        }
      ],
      "passes_initial_verification": true
    },
    "flatplate-192-native": {
      "case": "flatplate-192-native",
      "iterations": 643,
      "final_CD": 0.003409912677,
      "last_200_CD_relative_range": 5.3680504833315445e-05,
      "final_residuals": {
        "rms[P]": -10.00947728,
        "rms[U]": -10.44370957,
        "rms[V]": -11.04767438
      },
      "surface_fields": [
        "Pressure",
        "Velocity",
        "Pressure_Coefficient",
        "Density",
        "Laminar_Viscosity",
        "Heat_Capacity",
        "Thermal_Conductivity",
        "Temperature",
        "Skin_Friction_Coefficient",
        "Heat_Flux",
        "Y_Plus"
      ],
      "finite_surface_fields": true,
      "surface_points": 193,
      "wall_yplus_percentiles": [
        0.0,
        0.0,
        0.0,
        0.0,
        0.0,
        0.0
      ],
      "wall_point_fraction_yplus_30_to_300": 0.0,
      "expected_mean_Cf": 0.0034288812558423,
      "mean_Cf_relative_error": -0.005532002255832058,
      "local_Cf_rms_relative_error": 0.011948592960834503,
      "local_samples": [
        {
          "x_m": 0.05,
          "Cf": 0.00545342281675169,
          "Blasius": 0.005421537297360101
        },
        {
          "x_m": 0.1,
          "Cf": 0.0038616823246874323,
          "Blasius": 0.0038336057874191155
        },
        {
          "x_m": 0.25,
          "Cf": 0.0024534152254358163,
          "Blasius": 0.0024245851878895355
        },
        {
          "x_m": 0.45,
          "Cf": 0.0018407806946110015,
          "Blasius": 0.001807179099120034
        }
      ],
      "passes_initial_verification": true
    },
    "turbulent-plate-resolved128": {
      "case": "turbulent-plate-resolved128",
      "iterations": 790,
      "Cf_at_x_0_970084071": 0.0027114588380975956,
      "TMR_finest_FUN3D_incompressible_reference_Cf": 0.002717360621,
      "relative_difference": -0.0021718806318141715,
      "mean_Cf": 0.002869211151,
      "last_100_CD_relative_range": 1.2198474844183896e-08,
      "yplus_percentiles": [
        0.0,
        0.04351726174354553,
        0.04544796422123909,
        0.04912465438246727,
        0.07551167905330658
      ],
      "reference_url": "https://tmbwg.github.io/turbmodels/FlatPlate_validation/cf_incomp_results_sstv.dat",
      "scope": "TMR-like comparison with different mesh and SST-2003m; not exact cross-code verification or experimental validation."
    },
    "turbulent-plate-wf96": {
      "case": "turbulent-plate-wf96",
      "iterations": 5000,
      "Cf_at_x_0_970084071": 0.002563855126107008,
      "TMR_finest_FUN3D_incompressible_reference_Cf": 0.002717360621,
      "relative_difference": -0.056490659983326474,
      "mean_Cf": 0.002684984405,
      "last_100_CD_relative_range": 0.00010200814725842533,
      "yplus_percentiles": [
        0.0,
        28.071626663208008,
        29.28105926513672,
        31.585552215576172,
        37.2947998046875
      ],
      "reference_url": "https://tmbwg.github.io/turbmodels/FlatPlate_validation/cf_incomp_results_sstv.dat",
      "scope": "TMR-like comparison with different mesh and SST-2003m; not exact cross-code verification or experimental validation."
    }
  },
  "claims": {
    "drag_benefit": "NOT DEMONSTRATED. All frozen trial differences have positive sign; this does not establish the magnitude, or even a physically validated sign, of the real drag change.",
    "handling_stability": "NOT ESTABLISHED. No measured CG/CB/inertia, powered thrust map, tether model, dynamic pitch/yaw tests or full fluid-structure/control simulation.",
    "powered_probe_accuracy": "NOT ESTABLISHED. The true sensing-port geometry, powered propeller field and motor-on/off pressure calibration are absent.",
    "wake": "Computed steady viscous mean recirculation and modeled SST turbulent kinetic energy, not instantaneous resolved turbulent eddies."
  },
  "acceptance": {
    "positive_cells": true,
    "independent_force_integration_max_difference_percent": 0.08471104409909502,
    "drag_iteration_tolerance_percent": 0.1,
    "all_drag_iteration_ranges_below_tolerance": false,
    "all_turbulence_residuals_below_minus6": false,
    "wall_resolution_validated": false,
    "asymptotic_grid_convergence_demonstrated": false,
    "geometry_sensitivity_completed": false,
    "turbulence_model_sensitivity_completed": false,
    "experimental_validation": false,
    "accepted_drag_benefit": false
  },
  "limitations": [
    "Near-wall tetrahedral spacing and wall-function adequacy are not demonstrated; most fine-mesh wall area has 5 < y+ < 30 and no prism layer. This is a diagnostic, not by itself a proof of invalidity for a blended wall law.",
    "Coarse-grid turbulence equations did not settle, despite small mean-force changes. The three runs do not justify Richardson extrapolation or a GCI error bar.",
    "Medium, fine and enlarged-domain covered forces still drift over their final 100 iterations; the audits quantify it.",
    "The enlarged domain also regenerates its mesh, so the observed difference combines boundary extent and meshing variability.",
    "No transition-model, inlet-turbulence or roughness sensitivity study; transitional behavior is plausible at this hull Reynolds number and a fully turbulent assumption must be checked.",
    "The 1.5 mm geometric proxy suppresses small fittings and closes inaccessible voids. Purchased components are not an as-built scan.",
    "Local OpenMP wall-function call-site fix is disclosed; equations unchanged. Laminar and wall-resolved flat-plate checks do not validate the vehicle wall-function mesh."
  ],
  "excluded_continuations": {
    "cases": [
      "faired-final-8mm",
      "bare-final-8mm"
    ],
    "reason": "Experimental restarted continuations are excluded. Their recorded starting-checkpoint hashes no longer match the source files after subsequent final writes; exact starting inputs were not preserved. The eight compared cases all start from uniform flow with RESTART_SOL=NO."
  },
  "stopping": "Bounded screening trials. Medium, fine and enlarged-domain cases were stopped gracefully, preserving matching final fields and histories, once further iterations could not address the already failed near-wall/grid-validation gates. Some force drift remains and is reported, not treated as convergence. Exit Success only confirms coherent output. Coarse runs reached their specified iteration caps.",
  "outer_flux_audits": {
    "faired-run-6mm": {
      "case": "faired-run-6mm",
      "outer_boundary_triangles": 1920,
      "net_outward_volume_flux_m3_s": 6.796536035835743e-05,
      "inward_volume_flux_m3_s": 1.202536702156067,
      "outward_volume_flux_m3_s": 1.2026046514511108,
      "net_flux_relative_to_nominal_throughflow": 5.6637796660652384e-05,
      "method": "Linear triangle quadrature of exported nodal velocity on outer fluid boundary; not the solver dual-volume residual"
    },
    "bare-run-6mm": {
      "case": "bare-run-6mm",
      "outer_boundary_triangles": 1920,
      "net_outward_volume_flux_m3_s": 7.530077709816396e-05,
      "inward_volume_flux_m3_s": 1.2025063037872314,
      "outward_volume_flux_m3_s": 1.2025816440582275,
      "net_flux_relative_to_nominal_throughflow": 6.27506451564841e-05,
      "method": "Linear triangle quadrature of exported nodal velocity on outer fluid boundary; not the solver dual-volume residual"
    }
  },
  "streamlines": {
    "tested_paths": 131,
    "samples": 424253,
    "maximum_segment_sampling_m": 0.0005,
    "paths_rejected_outside_computed_fluid": [
      27
    ],
    "retained_paths": 130,
    "method": "Point-in-fluid finite-volume mesh check along resampled segments. No artificial path bending or turbulence added."
  },
  "streamline_step_check": {
    "comparison": "Maximum integration step 2 mm versus 1 mm, common physical arc length; same frozen mean field",
    "paths_compared": 131,
    "max_position_difference_m": 0.0004187305922351229,
    "scope": "Integration verification only, not discretization or turbulence-model validation"
  },
  "references": [
    "https://github.com/su2code/SU2/releases/tag/v8.5.0",
    "https://tmbwg.github.io/turbmodels/flatplate_sst.html",
    "https://www.grc.nasa.gov/www/wind/valid/tutorial/spatconv.html"
  ]
}